Honda XR125L User Manual

±
Refer to the Safety Precautions on page .
The engine must be at normal operating
temperature for accurate idle speed
adjustment. 10 minutes of stop-and-go riding
is sufficient.
Do not attempt to compensate for faults in
other systems by adjusting idle speed. See
your Honda dealer for regularly scheduled
carburetor adjustments.
Idle Speed:
Warm up the engine and hold the
motorcycle upright. Shift to neutral.
Adjust idle speed with the throttle stop
screw ( ).
Idle speed (In neutral):
1.
(1)
((BB))
((AA))
53
2.
1
(1) Throttle stop screw (A) Increase rpm
(B) Decrease rpm
IDLE SPEED
71
1,400 100 min
(rpm)
10/03/11 17:14:00 32KRHA00_081

Honda XR125L Specifications

General

Compression Ratio	9.2:1
Transmission	5-speed
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	Drum
Front Tire	90/90-19
Rear Tire	110/90-17
Ignition	CDI
Final Drive	Chain
Engine Type	Air-cooled 4-stroke single-cylinder OHC
Bore x Stroke	56.5 mm x 49.5 mm
Rear Suspension	Swingarm with single shock
Fuel Capacity	12 L
Max. Torque	10.4 Nm @ 6, 500 rpm