HP StorageWorks 8/20q User Manual

102 Managing Switches
Network DNS configuration
The Network Properties dialog box has two tabs: IP and DNS. Click the DNS tab to open the Network
Properties DNS dialog box (Figure 56). Use the Network Properties DNS dialog box to enable the DNS
Client on the switch and the DNS server to map domain names to IP addresses. Table 15 describes the
network DNS configuration parameters.
Table 15 Network Properties dialog box—DNS fields
Field Description
DNS Client Select this option to enable the Domain Name Service client.
Local Hostname Enter the name of the local host.
Server Discovery Choose one of the following methods by which to assign the IP address:
• Static—Uses the IP configuration parameters entered in the Network
Properties dialog box.
• DHCP (Dynamic Host Configuration Protocol)—Acquires the IP
configuration from a DHCP server. If no satisfactory lease is obtained,
the DHCP client attempts to use the previously configured lease. If the
previous lease cannot be used, no IP address is assigned to this switch
to avoid an IP address conflict.
• DHCPv6 (Dynamic Host Configuration Protocol version 6)—Acquires
the IP configuration from a DHCP server. If no satisfactory lease is
obtained, the DHCP client attempts to use the previously configured
lease. If the previous lease cannot be used, no IP address is assigned
to this switch to avoid an IP address conflict.
DNS Server Addresses Enter the IP address of the DNS server.
Search List Discovery Choose one of the following discovery methods for the search list:
• Static
• DHCP
• DHCPv6
Search List Domain Names Suffix that is appended to the user-specified hostname for the search.

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English