HP StorageWorks 8/20q User Manual

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide 21
Menu bars
The menus and the included tasks vary depending on the type of display. For example, the Port menu and
many of the Switch menu selections are only available in the faceplate display. For information on the
menus, see ”Topology menu bar options” (page 21) and ”Faceplate menu bar options” (page 22).
Topology display menu
The Topology menu bar options, listed in Table 2, are available when a fabric is selected in the fabric tree.
Table 2 Topology menu bar options
Option Sub-options
File Open View File
Save View File
Save Default Fabric View File
Preferences
Exit
Fabric Add Fabric
Remove Fabric
Nicknames
Fabric Tracker
Save Snapshot
Analyze Snapshots
Security Consistency Checklist
Rediscover Fabric
Start EFMS Performance View
FC TraceRoute
TR Mapping Manager
Show Event Browser
Switch
Options marked with an
asterisk (*) are available
only when one switch is
selected in the topology
display.
Delete*
Export Devices
Switch Properties*
Network Properties*
SNMP Properties*
Stack
These options are available
only when one stack is
selected in the topology
display.
Delete
Syslog
SNMP Properties
Set Date/Time
User Accounts
Security Consistency Checklist
Load Firmware
Edit Zoning Configuration

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English