Hypertherm XPR300 User Manual

Installation
3
XPR300 Instruction Manual 809480 109
Connect the gas connect console (Core) to the TorchConnect console
 The following installation steps are for the Core gas connect console.
 If you have a VWI or OptiMix gas connect console, refer to Connect the gas connect
console (VWI or OptiMix) to the TorchConnect console on page 113.
Connect the pilot arc and coolant hose set assembly (Core)
Figure 25 – Pilot arc and coolant hose set assembly

For lengths, refer to Pilot arc and coolant hose set assembly (Core) on
page 395 of the Parts List.
1. Connect the lead assembly to the gas connect console:
a. Put the hoses and lead through the hole in the
gas connect console.
To gas connect console To torch connect console
4
1
2
3
2
3
1
4
1 Pilot arc lead (yellow)
2 Coolant return hose (red band)
3 Coolant supply hose (green band)
4 Lead coupler
a

Hypertherm XPR300 Specifications

General

Brand	Hypertherm
Model	XPR300
Category	Welding System
Language	English