Hypertherm XPR300 User Manual

Qualifications and Requirements
2
64 809480 Instruction Manual XPR300
Torch mounting bracket requirements
You must supply the torch mounting bracket for your cutting system. Choose one that does the
following:
 Holds a torch diameter that is 57.15 mm (2.25 inches)
 Holds the torch perpendicular (at a 90° angle) to the workpiece (for non-bevel cutting)
 Does not interfere with the torch lifter

The XPR torch mounting sleeve is larger than the torch mounting sleeve
for HPR torches. Modification or replacement of previous mounting
hardware is necessary for XPR torches.

Mounting brackets are available from Hypertherm. Refer to Torch bracket
on page 387 of the Parts List.
Torch lifter requirements
Choose a lifter that has a weight capacity of at least 11.3 kg (25 lb). This includes the weight of a
torch rotational sleeve, if used.

Refer to your torch lifter instruction manual for more information.

Hypertherm XPR300 Specifications

General

Brand	Hypertherm
Model	XPR300
Category	Welding System
Language	English