To Next Page

To Previous Page

Parts List

XPR300 Instruction Manual 809480 397

Plasma power supply to CNC connections

EtherCAT CNC interface cable

Description: RJ-45 connector, male-male, SF/UTP shield, 2 twisted pairs, 22 AWG

For more information on EtherCAT cable specifications, refer to How to connect to the plasma

power supply with EtherCAT on page 149.

Discrete CNC interface cable

Part number Length Part number Length

223506 0.3 m (1 foot) 223512 10 m (32.8 feet)

223507 0.6 m (2 feet) 223513 15 m (49.2 feet)

223508 1.5 m (4.9 feet) 223514 22.5 m (73.8 feet)

223672 2.5 m (8.2 feet) 223515 30 m (98.4 feet)

223509 3 m (9.8 feet) 223516 45 m (147.6 feet)

223510 6m (19.7feet) 223517 60 m (196.9 feet)

223511 7.5 m (24.6 feet) 223714 75 m (246.1 feet)

1 12 1 8

J14

J19

Part number Length Part number Length

223691 3 m (9.8 feet) 223700 20 m (65.6 feet)

223692 4.5 m (14.8 feet) 223701 22.5 m (73.8 feet)

223693 6 m (19.7 feet) 223702 25 m (82 feet)

223694 7.5m (24.6feet) 223703 30 m (98.4 feet)

223695 10 m (32.8 feet) 223704 35 m (114.8 feet)

223696 12 m (39.4 feet) 223705 37.5 m (123 feet)

223697 13.5 m (44.3 feet) 223706 45 m (147.6 feet)

223698 15 m (49.2 feet) 223707 60 m (196.9 feet)

223699 16.5 m (54.1 feet) 223708 75 m (246.1 feet)

Hypertherm XPR300 User Manual

Other manuals for Hypertherm XPR300