Reference
Code
Description/Action
(Perform all actions before exchanging Failing
Items)
Failing Item
9236 Frame timeout. status
An SPCN frame node timeout occurred during
network post processing.
1. SPCN card assembly, R21
Location: U1.1-P2-X1
2. Go to “MAP 1520: Power” on page 88,
assume that you do not have an error code
when following the MAP.
9238 Secondary node fault.
An SPCN Secondary node fault. occurred during
command processing.
1. SPCN card assembly, R21
Location: U1.1-P2-X1
2. SPCN code problem
9239 Frame node fault.
An internal error in the SPCN frame node
prevents the running of a Frame command.
1. SPCN card assembly, R21
Location: U1.1-P2-X1
2. SPCN code problem
923A ASA failure.
The frame address returned by a secondary node
does not match the address of the frame.
1. SPCN card assembly, R21
Location: U1.1-P2-X1
2. SPCN code problem
923B Invalid packet length for data sent.
An invalid packet length occurred for data
exchanged.
1. SPCN code problem
2. SPCN card assembly, R21
Location: U1.1-P2-X1
9280 Response stack overflow.
Too many responses were received during system
frame command processing.
1. Go to “MAP 1520: Power” on page 88,
assume that you do not have an error code
when following the MAP.
2. SPCN code problem
3. ac box
Location: U1.2-V7
9281 Response overrun.
Response overrun occurred during system frame
processing.
1. Go to “MAP 1520: Power” on page 88,
assume that you do not have an error code
when following the MAP.
2. SPCN code problem
3. ac box
Location: U1.2-V7
9282 No free entries.
No free entries were found during system frame
processing.
1. Go to “MAP 1520: Power” on page 88,
assume that you do not have an error code
when following the MAP.
2. SPCN code problem
3. ac box
Location: U1.2-V7
9283 ARA failure.
An assign frame address failure occurred during
ARA preprocessing.
1. SPCN card assembly, R21
Location: U1.1-P2-X1
2. SPCN code problem
1xxx
212
Service Guide
To Next Page
Loading...
Need help?
General