ITech IT8000 Series Programming Guide

PARallel Subsystem
SINGle|SLAVe|MASTer
PARallel:NUMBer <NR1>
This command is used to set the total number of instruments in the case of par-
allel (i.e., the sum of the masters and slaves).
Group
PARallel
Syntax
PARallel:NUMBer <NR1>
Arguments
<NR1>
Setting range: 1 to 8
Default Value
1
Example
PARallel:NUMBer 3
Query Syntax
PARallel:NUMBer?
Returns
<NR1>
Copyright © Itech Electronic Co., Ltd.
117

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English