ITech IT8000 Series Programming Guide

IEEE-488 Common Commands
Arguments
None
Default Value
None
Returns
None
Example
*OPC
Also see
*OPC?
*OPC?
Returns a 1 to the output buffer when all pending operations complete. The re-
sponse is delayed until all pending operations complete.
• The purpose of this command is to synchronize your application with the
instrument.
• Other commands cannot be executed until this command completes.
Group
None
Syntax
*OPC?
Arguments
None
Default Value
None
Copyright © Itech Electronic Co., Ltd.
168

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English