IEEE-488 Common Commands
*TRG
Trigger command. Generates a trigger when the trigger subsystem has BUS se-
lected as its source.
Group
None
Syntax
*TRG
Arguments
None
Default Value
None
Returns
None
Example
*TRG
Also see
None
*SAV <NR1>
Save the instrument [On/Off] status or several parameter settings to 10 non-
volatile memories, and the position can be set from 0 to 9. When shipped, loca-
tions 0 through 9 are empty.
If the PowerOn in the System menu is set to Last, after the instrument is
powered off and restarted, the setting of each parameter is equivalent to exe-
cuting the *SAV 0 and *RCL 0 commands in sequence.
Copyright © Itech Electronic Co., Ltd.
174
To Next Page
Loading...
Need help?
General
