ITech IT8000 Series Programming Guide

IEEE-488 Common Commands
Arguments
<NR1>
A decimal value corresponding to the binary-weighted sum of the register's bits.
The setting range is from 0 to 255.
Default Value
0
Returns
None
Example
Enable bit 3 and bit 4 in the enable register: *SRE 24
Also see
*SRE?
*SRE?
Query the value of the service request enable register.
Group
None
Syntax
*SRE?
Arguments
None
Default Value
None
Returns
<NR1>
Copyright © Itech Electronic Co., Ltd.
172

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English