ITech IT8000 Series Programming Guide

SOURce Subsystem
Example
LOOP:SPEed HIGH
Query Syntax
[SOURce:]LOOP:SPEed?
Returns
HIGH|LOW
12.3 [SOURce:]FUNCtion:MODE <CPD>
This command is used to set the functional mode of the load, i.e. transient
mode. This determines what happens to the input current when the transient
system is initiated and triggered.
• FIXed: The default value indicates that the instrument is operating in fixed
mode. Keeps the input current at its immediate value.
• ARB: Indicates that the instrument is operating in ARB mode. When a trigger
occurs, ARB will cause the input to follow the list value.
• BATTery: Indicates that the instrument is operating in battery test mode.
When a trigger occurs, it is input based on the edited battery test file.
Group
SOURce
Syntax
[SOURce:]FUNCtion:MODE <CPD>
Arguments
<CPD>
FIXed|ARB|BATTery
Default Value
FIXed
Copyright © Itech Electronic Co., Ltd.
124

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English