ITech IT8000 Series Programming Guide

SYSTem Subsystem
Default Value
None
Returns
<SRD>
<hh>,<mm>,<ss>
Example
SYST:TIME?
Also see
None
SYSTem:COMMunicate:SELect <CPD>
This command is used to set the communication method. This series instrument
comes standard with four communication interfaces: USB, LAN, VCP and CAN,
and supports two optional communication interfaces: GPIB, RS-232. And the
RS232 and GPIB options can be selected only after the communication board
corresponding to RS232 and GPIB is successfully inserted into the correspond-
ing position on the rear panel of the instrument.
Group
System
Syntax
SYSTem:COMMunicate:SELect <CPD>
Arguments
RS232|USB|GPIB|LAN|CAN|VCP
Default Value
USB
Copyright © Itech Electronic Co., Ltd.
23

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English