ITech IT8000 Series Programming Guide

IEEE-488 Common Commands
The specific parameter information can be found in the user manual.
Group
None
Syntax
*SAV <NR1>
Arguments
<NR1>
The setting range is from 0 to 9.
Default Value
None
Returns
None
Example
*SAV 2
Also see
*RCL <NR1>
*RCL <NR1>
Recalls a saved instrument state. This restores the instrument to a state that
was previously stored in locations 0 through 9 with the *SAV command.
Group
None
Syntax
*RCL <NR1>
Copyright © Itech Electronic Co., Ltd.
175

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English