ITech IT8000 Series Programming Guide

ARB Subsystem
15.2 ARB:FUNCtion <CPD>
This command is used to set the operation mode of the custom waveform.
Group
ARB
Syntax
ARB:FUNCtion <CPD>
Arguments
<CPD>
VOLTage|CURRent|POWer|RESistance
Default Value
VOLTage
Example
ARB:FUNCtion CURRent
Query Syntax
ARB:FUNCtion?
Returns
<CRD>
VOLTage|CURRent|POWer|RESistance
15.3 ARB:UDEFined:LEVel <NR1>,<NRf+>
This command is used to set the amplitude corresponding to the X step of the
user-defined waveform.
Group
ARB
Copyright © Itech Electronic Co., Ltd.
157

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English