ITech IT8000 Series Programming Guide

SOURce Subsystem
12.23 [SOURce:]POWer:PROTection[:LEVel] <NRf
+>
This command is used to set the limit value of over power protection.
Group
SOURce
Syntax
[SOURce:]POWer:PROTection[:LEVel] <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN to MAX
Default Value
None
Example
POW:PROT 10
Query Syntax
[SOURce:]POWer:PROTection[:LEVel]?
Returns
<NRf+>
12.24 [SOURce:]POWer:PROTection:DELay <NRf
+>
This command is used to set the delay time of over power protection.
Copyright © Itech Electronic Co., Ltd.
141

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English