ITech IT8000 Series Programming Guide

STATus Subsystem
Example
Enable bit 3 and 4 in the questionable NTR register: STATus:QUEStionable:
NTRansition 24
Query Syntax
STATus:QUEStionable:NTRansition?
Returns
<NR1>
STATus:QUEStionable:CONDition?
Queries the condition register for the Questionable Status group. This is a read-
only register, which holds the live (unlatched) operational status of the instru-
ment. Reading the Questionable Status Condition register does not clear it.
• The value returned is the binary-weighted sum of all enabled bits in the
register. For example, with bit 2 (value 4) and bit 4 (value 16) set, the query
returns +20.
• The condition register bits reflect the current condition. If a condition goes
away, the corresponding bit is cleared.
• *RST clears this register, other than those bits where the condition still exists
after *RST.
Group
STATus
Syntax
STATus:QUEStionable:CONDition?
Arguments
None
Default Value
None
Copyright © Itech Electronic Co., Ltd.
80

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English