ITech IT8000 Series Programming Guide

CONFigurable Subsystem
Arguments
<NRL>
0 to 6
Default Value
None
Returns
<Bool>
0|OUT|1|IN
Example
IO:DIR? 0
Also see
None
[CONFigurable:]IO:REVerse <NRL>, <Bool>
This command is used to control whether the digital signal of the specified pin is
inverted:
• <NRL>: Used to specify the pin number. Pins 1 to 7 correspond to number 0
to 6.
• <Bool>: Used to control whether the digital signal of the specified pin is
inverted.
– 0|OFF: No
– 1|ON: Yes
Group
CONFigurable
Syntax
[CONFigurable:]IO:REVerse <NRL>, <Bool>
Copyright © Itech Electronic Co., Ltd.
43

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English