CONFigurable Subsystem
Example
IO:TYPE 0, PWM
Also see
[CONFigurable:]IO:TYPE? <NRL>
[CONFigurable:]IO:TYPE? <NRL>
This command is used to query the pin function of the specified pin.
• PSCLear: Corresponds to the default function of pin 1. Indicates that the pro-
tection status is cleared by this pin when the instrument generates
protection.
• PSSTa: Corresponds to the default function of pin 2. Indicates that the out-
put level of pin 2 indicates whether the instrument is protected.
• OFFSta: Corresponds to the default function of pin 3. Used to indicate the
[On/Off] status of the instrument.
• EXTTrig|TOUT: Corresponds to the default function of pin 4. Indicates that
when the instrument generates a trigger signal (trigger Meter, data logging
or List function running), a pulse signal will be output from pin 4.
• INHLiv|INHLat: Corresponds to the default function of pin 5. Indicates that
the instrument is operated in the LIVING mode by the pin 5.
• SYON: Corresponds to the default function of pin 6. Indicates that pin 6 per-
forms bi-directional and synchronous control over the turn-on of [On/Off]
under parallel connection.
• SYOFF: Corresponds to the default function of pin 7. Indicates that pin 7 per-
forms bi-directional and synchronous control over the turn-off of [On/Off]
under parallel connection.
Group
CONFigurable
Syntax
[CONFigurable:]IO:TYPE? <NRL>
Arguments
<NRL>
Copyright © Itech Electronic Co., Ltd.
53
To Next Page
Loading...
Need help?
General
