ITech IT8000 Series Programming Guide

CONFigurable Subsystem
– 1|IN: The digital I/O signal is sent from the external device to the pin of
the instrument.
Group
CONFigurable
Syntax
[CONFigurable:]IO:DIRection <NRL>, <Bool>
Arguments
<NRL>, <Bool>
0 to 6, 0|OUT|1|IN
Default Value
0, 0|OUT
Returns
None
Example
Set the pin 1 as the signal input: IO:DIR 0, 1
Also see
[CONFigurable:]IO:DIRection? <NRL>
[CONFigurable:]IO:DIRection? <NRL>
This command is used to query the direction of the digital signal of the specified
pin.
Group
CONFigurable
Syntax
[CONFigurable:]IO:DIRection? <NRL>
Copyright © Itech Electronic Co., Ltd.
42

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English