ITech IT8000 Series Programming Guide

SOURce Subsystem
Default Value
None
Example
RES 5
Query Syntax
[SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude]?
Returns
<NRf+>
12.21 [SOURce:]POWer[:LEVel][:IMMediate][:
AMPLitude] <NRf+>
This command is used to set the power value in CW operation mode.
Group
SOURce
Syntax
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN to MAX
Default Value
None
Example
POW 10
Copyright © Itech Electronic Co., Ltd.
139

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English