ITech IT8000 Series Programming Guide

SOURce Subsystem
Returns
<NRf+>
12.28 [SOURce:]VOLTage[:ON]:LATCh[:STATe]
<Bool>
This command is used to turn the Von latch mode on or off.
Group
SOURce
Syntax
[SOURce:]VOLTage[:ON]:LATCh[:STATe] <Bool>
Arguments
<Bool>
0|OFF|1|ON
Default Value
None
Example
VOLT:LATCh 1
Query Syntax
[SOURce:]VOLTage[:ON]:LATCh[:STATe]?
Returns
0|1
12.29 [SOURce:]VOLTage:ON:HYSTeresis[:
LEVel] <NRf+>
This command sets the hysteresis value in the Living mode of the load.
Copyright © Itech Electronic Co., Ltd.
145

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English