Industrial Sewing Machine SADE
115
7.11 Cleaning the machine during work
NOTE!
It is unacceptable to wash electrical and electronical equipment
with water spray.
NOTE!
Before cleaning, absolutely turn off the power and remove the plug
from the socket – you will avoid the risk of accidental start by unau-
thorized persons.
NOTE!
The use of solvents for cleaning the paintwork is unacceptable.
There is a risk of damage of the surface being cleaned.
At least once a day, clean the inside of the machine from accumulating the dirt inside.
After removal of the cover clean thoroughly inside and around the looper, needle bar
and plate from all pollution. Use a brush for this purpose.
When cleaning is not required:
− dismantling of the entire team working on parts or
− the use of chemicals.
Also remember about cleaning the area around the machine.
Particular care should be taken not to damage the power cord and switch.
To Next Page
Loading...
Need help?
General
