Industrial Sewing Machine SADE
82
7.1.2.11 Explanation of the product profile parameters
Seam length
Defines the seam lengths of pre seam, safety seam and post seam. You can type the
length into the boxes, use the scroll buttons or simply move the stitch graph by hand.
Fig. 49. Product profile parameters
Post seam
The maximum number of stitches after recognition of the last notch. This setting won’t
affect the product traceability as the piece is already validated after the last notch. Still it
might be useful to prevent the operator from sewing too much.
Notch 1 types of notches
The system enables you to select normal positive notches, an negative V notch and no
notch.
When selecting the no notch option then you need to simply define the amount of
stitches from pre seam, safety seam and post seam.
Defines the position and the tolerance for the first Notch (indication of start of the safety
seam). Tolerance indicates of how many stitches earlier or later the notch has to be
reached. This applies for BOTH normal positive and V notch.
The setting no notches has no tolerance settings.
To Next Page
Loading...
Need help?
General
