Industrial Sewing Machine SADE
79
7.1.2.9 Product definition options
Fig. 44. Product definition options
Under [product] tab options a product definition can be made. The product definition
contains all relevant data to perform the sewing of a product.
It has to contain the sewing job which defines the seam length´s and the thread tension
limits and the stitch length setting, and the materials which should be used. It will be
checked by the scanners upon starting the sewing process.
You can activate or deactivate the Stitch counter and define the amount of stitches for
the needle wear.
You select the sewing job for the seam length and thread tension settings first, then you
give a name under which you want to save the product definition.
You can select the material to be used material from the material database.
Adding material is done by clicking at the bottom of each material field.
Once you have selected a material in the materials field you can also delete it by
clicking .
Editing any entry can always be done by clicking .
7.1.2.10 Material definition options
Under [Material] tab options all material definition can be made.
In each material group you can add an unlimited amount of materials.