EasyManuals Logo
Home>JUKI>Sewing Machine>SADE

JUKI SADE User Manual

JUKI SADE
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Industrial Sewing Machine SADE
20
Be sure to check that screws and nuts are free from looseness after completion of
repair, adjustment and part replacement.
Be sure to periodically clean up the machine during its duration of use. Be sure to
turn the power off and verify that the machine and motor stop completely before
cleaning the machine in order to prevent accident caused by abrupt start of the
machine or motor.
At electrical works disconnect the mains power supplying the machine.
Be sure to turn the power off and verify that the machine and motor stop complete-
ly before carrying out maintenance, inspection or repair of the machine. (For the
machine with a clutch motor, the motor will keep running for a while by inertia even
after turning the power off. So, be careful.)
Protective devices should be checked regularly and replaced at appropriate time.
In case of any damages of electrical installation, disconnect the machine from the
mains and call an electrician with appropriate privileges.
Conduct periodic reviews of the machine functioning, in particular of safety devices
- see section 8.1.
Also after making changes or maintenance carry out checks of the machine and
report the results of checks.
The competent and trained staff must carry out periodic inspections and mainte-
nance program.
If the machine cannot be normally operated after repair or adjustment, immediately
stop operation and contact JUKI or the distributor in your area for repair in order to
prevent accident that can result in personal injury or death.
If the fuse has blown, be sure to turn the power off and eliminate the cause of
blowing of the fuse and replace the blown fuse with a new one in order to prevent
accident that can result in personal injury or death.
Be sure to periodically clean up the air vent of the fan and inspect the area around
the wiring in order to prevent fire accident of the motor.
Lubrication
Be sure to use JUKI genuine oil and JUKI genuine grease to the parts to be lubri-
cated.
If the oil adheres on your eye or body, be sure to immediately wash it off in order
to prevent inflammation or irritation.
If the oil is swallowed unintentionally, be sure to immediately consult a medical
doctor in order to prevent diarrhea or vomiting.
2.8 Principles for safe handling, transportation and unpacking
The machine is transported in the form of a partially disassembled in the wooden
box (see clause 4.2).
Be sure to lift and move the machine in a safe manner taking the machine weight
in consideration. Refer to the text of the instruction manual for the mass of the ma-
chine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUKI SADE and is the answer not in the manual?

JUKI SADE Specifications

General IconGeneral
BrandJUKI
ModelSADE
CategorySewing Machine
LanguageEnglish

Related product manuals