Industrial Sewing Machine SADE
22
2.10 Safety signs
Pictograms (safety signs) on the machine warn against hazards which might arise while
operating the industrial sewing machine SADE and give tips on proper use.
Signs should always be clear and clean, unobstructed and visible to the operator and
other persons who may find themselves in the vicinity of the working machine.
Be sure to operate the machine after verifying that safety device(s) is correctly installed in
place and works normally in order to prevent accident caused by lack of the device(s)
If the sign loses legibility or degraded or lost, replace it with a new, also if it was on the
parts, which at the time of repairs were replaced on another.
The risk indications are classified into the following three different categories to help un-
derstand the meaning of the labels. Be sure to fully understand the following description
and strictly observe the instructions.
Explanation of risk levels
This indication is given where there is an immediate danger of death or
serious injury if the person in charge or any third party mishandles the
machine or does not avoid the dangerous situation when operating or
maintaining the machine.
This indication is given where there is a potentiality for death or serious
injury if the person in charge or any third party mishandles the machine or
does not avoid the dangerous situation when operating or maintaining the
machine.
This indication is given where there is a danger of medium to minor injury
if the person in charge or any third party mishandles the machine or does
not avoid the dangerous situation when operating or maintaining the ma-
chine.
Items requiring special attention.
To Next Page
Loading...
Need help?
General
