Industrial Sewing Machine SADE
17
To ensure safety, never operate the machine with the ground wire for the power
supply removed.
When inserting/removing the power plug, the power switch has to be turned OFF
in advance.
In time of thunder and lightening, stop your work and disconnect the power plug
from the receptacle so as to ensure safety.
If the machine is suddenly moved from a cold place to a warm place, dew conden-
sation may be observed. In this case, turn ON the power to the machine after you
have confirmed that there is no danger of water drops in the machine.
To prevent fires, periodically draw out the power plug from the plug socket and
clean the root of the pins and the space between pins.
The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands, be sure to keep your hands away from the vi-
cinity of the hook during operation. In addition, be sure to turn OFF the power to
the machine when replacing the bobbin.
To avoid possible accidents due to abrupt start of the machine, be sure to turn
OFF the power to the machine.
Be careful of handling this product so as not to pour water or oil, shock by drop-
ping, and the like since this product is a precision instrument.
When tilting or returning the sewing machine to the home position, hold the upper
side of the machine head with both hands and perform the work quietly so that fin-
gers or the like are not caught in the machine.
CAUTION!
Safety devices such as the "finger guard" are sometimes omitted
in the sketches, illustrations and figures included in the Instruction
Manual for easy explanation. In the practical use, never remove
those safety devices.
2.5 Operating environment
Be sure to use the machine under the environment which is not affected by strong
noise source (electromagnetic waves) in order to prevent accident caused by mal-
function of the machine.
Never operate the machine in any place where the voltage fluctuates by more than
"rated voltage ±10 %" in order to prevent accident caused by malfunction of the
machine.
Be sure to verify that the air-driven device such as an air cylinder operates at the
specified air pressure before using it in order to prevent accident caused by mal-
function of the machine.
To Next Page
Loading...
Need help?
General
