Industrial Sewing Machine SADE
13
6. The sewing machine can handle only adults trained in the safe operation of elec-
trical equipment, safety regulations and familiar with the contents of this manual.
7. In order to prevent accident resulting from unfamiliarity with the machine, the ma-
chine has to be used only by the operator who has been trained/educated by the
employer with respect to the machine operation and how to operate the machine
with safety to acquire adequate knowledge and operation skill. To ensure the
above, the employer has to establish an education/training plan for the operators
and educate/train them beforehand.
8. Be sure to wear safety goggles to protect against accident caused by needle
breakage.
9. The use of the machine by underage and children is forbidden.
10. The use of the machine by people who are ill, are under the influence of alcohol or
other drugs is forbidden.
11. It is forbidden for bystanders to stay near the sewing machine while: working, re-
paired, cleaned or undergoing maintenance.
12. Never modify and alter the machine in order to prevent accident that can result in
personal injury or death. JUKI assumes no responsibility for damages or personal
injury or death resulting from the machine which has been modified or altered.
13. Operate the sewing machine staying at the front of the machine. Regulate the
working surface height adapting it to your size.
14. All areas of work, traffic and the passage keep in the proper cleanliness.
15. Those who use a heart pacer have to use the machine after consultation with
a medical specialist.
2.2 Safety rules of the first assembly
NOTE!
Be very careful during the first assembly.
Make sure the space and means necessary to first assembly of machine comply
with safety requirements and these operating instructions.
Ensure that proper ventilation is provided in the building.
The building, which will work the machine in, must be protected from lightning dis-
charges, ie. lightning.
The person responsible for occupational health and safety at the plant should de-
cide on the basis of risk assessment whether there is required to install the smoke,
dust and other air contaminants detector in the facility.
Follow the rules for safe installation described in the section. 4.2.
To Next Page
Loading...
Need help?
General
