Industrial Sewing Machine SADE
41
4 PRELIMINARY OPERATIONS AND PUTTING INTO SER-
VICE
4.1 Ordering and delivery
NOTE!
Carrying on loads over people and animals is forbidden.
The orders for sewing machine SADE can be submitted to the manufacturer or his sup-
pliers.
The sewing machine can be ordered with additional equipment - see section 3.4.
Machine SADE is sent in the form of a partially disassembled – in a wooden box set on
a pallet. Only a monitor and stand for thread spools are not fastened.
Additionally support legs of the machine are mounted by metal bands and additional
screws to the pallet that prevents damaging the machine while delivering it to the cus-
tomer (see fig. 21).
Fig. 21. Securing machine support legs
Transportation of machine carries out a producer, dealer or client, on the basis of addi-
tional decisions.
During transport, the wooden box with a machine should be protected against unex-
pected movement.
For loading and unloading, use a forklift or other device intended to carry a load with
sufficient capacity. The forks should be inserted underneath a pallet with the box.
The operator of these devices must have a valid permission to operate them.
To Next Page
Loading...
Need help?
General
