Industrial Sewing Machine SADE
19
Be sure to turn the power off in the case of power failure in order to prevent acci-
dent resulting of breakage of electrical components.
2.7 Rules for safe cleaning, maintenance and repair
NOTE!
When you do not use the grinder for sharpening tools (eg. during
service, maintenance, work breaks) turn off the power and remove
the plug from the socket or switch the main switch at the
box to „0” (then secure it in position "0") –
you will avoid the risk of
accidental start by unauthorized persons.
DANGER!
When it is necessary to open the control box containing electrical
parts, be sure to turn the power off and wait for five minutes or
more before opening the cover in order to prevent accident leading
to electrical shock.
In prevention of accident caused by unfamiliarity with the machine, repair and ad-
justment has to be carried out by a service technician who is thoroughly familiar
with the machine within the scope defined in the instruction manual. Be sure to
use JUKI genuine parts when replacing any of the machine parts. JUKI assumes
no responsibility for any accident caused by improper repair or adjustment or the
use of any part other than JUKI genuine one.
In prevention of accident caused by unfamiliarity with the machine or electrical-
shock accident, be sure to ask an electrical technician of your company or JUKI or
distributor in your area for repair and maintenance (including wiring) of electrical
components.
At the appropriate time perform periodic inspections and maintenance.
All activities related to repairs and assembly of spare parts can be made after
reading the safety requirements described in this manual.
The user is responsible for the proper execution of spare parts assembly in the
machine.
When executing any work use appropriate and safe tools.
Performing any maintenance on machine in move and works which may contribute
to lower the safety level of the machine is forbidden.
When carrying out repair or maintenance of the machine which uses air-driven
parts such as an air cylinder, be sure to remove the air supply pipe to expel air
remaining in the machine beforehand, in order to prevent accident caused by ab-
rupt start of the air-driven parts.
Spare parts must be purchased from the manufacturer (see "Spare parts catalog").
To Next Page
Loading...
Need help?
General
