Industrial Sewing Machine SADE
21
For loading and unloading, use a forklift or other device intended to carry a load
with sufficient capacity. The forks should be inserted underneath a pallet with the
box.
Persons operating these devices should have a valid permission to operate them.
Be sure to take sufficient safety measures to prevent falling or dropping before lift-
ing or moving the machine in order to protect against accident that can result in
personal injury or death.
Secure pallet with the box against uncontrolled movement while driving on the
transport box.
Once the machine has been unpacked, never re-pack it for transportation to pro-
tect the machine against breakage resulting from unexpected accident or drop-
ping.
Unpacking
Be sure to unpack the machine in the prescribed order in order to prevent accident
that can result in personal injury or death. In the case the machine is crated, in
particular, be sure to carefully check nails. The nails have to be removed.
Be sure to check the machine for the position of its center of gravity and take it out
from the package carefully in order to prevent accident that can result in personal
injury or death.
2.9 Fire prevention regulations
Do not extinguish any fire at the machine or in its vicinity with water. To
extinguish use only funds specialized for this purpose.
In case of fire:
o disconnect the machine from the mains,
o evacuate people being in dangerous zone,
o notify the fire department,
o proceed to extinguish.
Extinguishing the electrical installation with water or foam fire extinguisher is for-
bidden.
Cut off the oxygen supply as soon as possible.
The user of the machine is responsible to completion of all obligations relating to
fire protection.
Smoking and using open flames near the machine during operation is unaccepta-
ble.
Repairs, and particularly welding can be carried out after a thorough cleaning of
the machine of contaminations. Before starting welding work, electrical wires,
bearings, plastic parts must be protected from overheating.
To Next Page
Loading...
Need help?
General
