Industrial Sewing Machine SADE
14
Two persons should perform the work associated with the first installation, at the
destination.
For loading and unloading use forklift or other devices for carrying loads with suffi-
cient capacity. The forks must be inserted under the palette that includes wooden
box with machine, and during assembly legs under working table.
Check the tightening of the thread stand or monitor.
The safety devices should be effective and should not be bypassed.
2.3 Safe working practices for connecting to line power
User is responsible for the correct execution of the electrical system in the build-
ing.
User is responsible for the correctness of connection points of power consumption
and their proper operation.
User is responsible for proper execution and periodic monitoring of protection
against electric in the installation of used machine.
The machine is supplied with hazardous mains voltage 1 x 230 V / 50 Hz. The us-
er must provide a suitable connection to the electricity grid.
Before connecting the machine check that the power supply voltage is in accord-
ance with the requirements of the machine. It will avoid of burn its electrical
equipment due to insufficient voltage.
The machine can be connected by plug / socket unit to the electricity grid.
Check reliability of connection. Be sure to securely connect the plug in order to
prevent electrical-shock, earth-leakage or fire accident. In addition, be sure to re-
move the plug while holding its (not wire).
Be sure to prevent an extra force from being applied to the cable during the use in
order to prevent electrical-shock, earth-leakage or fire accident.
Be sure to connect the power plug to the grounded outlet without exceptions.
2.4 Safe working practices during operation
The using of all designed protective covers is absolute obligatory.
Keep the operating instructions near the machine in order to have it
To Next Page
Loading...
Need help?
General
