Industrial Sewing Machine SADE
77
WARNING!
At start-up of Sade, all files on this
location will be copied into the local folder. Local
files with similar filenames will be overwritten without notice. If the assigned folder is
empty, only local files will be used.
Remote Dbase and text output is used to point a location where copies of the traceabil-
ity files are stored. The files will append a record on each approved production cycle.
Use this function if a stable networking environment can be guaranteed. Scheduled ex-
ternal synchronisation with the locally stored traceability files will increase security of the
files and enabled maximum safety of output data.
7.1.2.7 Product selection menu
Fig. 42. Product selection menu
The product identification code enables Sade to load relevant data from the product da-
tabase into the PC memory and to set the options of seam length, thread tension, and
block the machine functions. The operator enters the code of the resulting product.
When the product is existing in the database it is shown in the main menu after start up.
The operator either scans a bar code of the product to select it or he selects the product
from the menu or he enters the product code.
If the operator tries to enter a product i.d. code that does not exist the SADE it will re-
fuse this code and the operator won’t be able to start a product cycle.
To Next Page
Loading...
Need help?
General
