82
These US parameters are special parameters which are not needed
in every application. They are turned off by default by the control
manufacturer. The following serves only as a list of these parameters.
For further adjustment refer to section 8.0.
Other US parameters
US.14 Comm Error Para Address
US.15 Comm Error Data
US.16 E.OL2 function
US.17 Pretorque Timer-Ramp Up
US.18 Pretorque Timer-Ramp Dwn
US.20 Max speed for max Ki
US.21 Speed for min Ki
US.22 Speed dependent Kp Gain
US.23 Min KPgain at high speed
US.24 KD speed gain
US.25 Phase current check
US.26 Encoder diagnostic
US.27 Power Unit Code
US.28 Analog input zero volt clamp
US.29 HSP5 Watchdog Time
US.33 E.dOH Function
US.34 Analog Pattern Gain
US.35 Reference Splitting
US.36 Baud Rate X6C (DIN66019)
US.37 Test Function
US.83 Encoder 2 Output PPR
US.84 Analog Output 2
Parameter Description - Basic Set Up
To Next Page
Loading...
Need help?
General