Model 6220/6221 Reference Manual IEEE-488 and SCPI Conformance Information D-3
Return to Appendix topics
(13) Calibration query information. Section 17.
(14) Trigger macro for *DDT. Not applicable.
(15) Macro information. Not applicable.
(16) Response to *IDN (identification). See Common Commands in Section 12.
(17) Storage area for *PUD and *PUD? Not applicable.
(18) Resource description for *RDT and *RDT? Not applicable.
(19) Effects of *RST, *RCL, and *SAV. See Common Commands in Section 12.
(20) *TST information. See Common Commands in Section 12.
(21) Status register structure. See Status Structure in Section 11
(22) Sequential or overlapped commands. All are sequential except :INIT which is
overlapped.
(23) Operation complete messages. *OPC, *OPC?, and *WAI; see Common
Commands in Section 12.
Tabl e D- 2
Coupled commands
Sending Changes To
SOUR:DELT:HIGH <value> SOUR:DELT:LOW <value> :HIGH <value>
Table D-1 (cont.)
IEEE-488 documentation requirements
Requirements Description or Reference
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
