4
Front Panel Operation
4-1
4.1 Introduction
This section covers all aspects of
front panel operation.
Paragraphs in this section are organized as follows:
4.2 Power-up procedure:
Covers information on
connecting the instrument to line power, and the
power-up sequence.
4.3 Display:
Covers the display formats and lists
messages that may appear while using the instru-
ment.
4.4 Analog backplane:
Explains how two Model
701X series switching cards may be internally
connected together through the analog back-
plane of the Model 7001.
4.5 Mainframe programming:
Explains how to cre-
ate a channel list and a scan list. The basic close/
open operation and scan operation is covered
here.
4.6 MENU:
Covers miscellaneous operations and se-
lections controlled from the MAIN MENU.
4.7 CARD CONFIG:
Covers the various conÞgura-
tion operations for the two slots (Card 1 and Card
2) from the CARD CONFIG MENU.
4.8 SCAN CONFIG:
Covers the CONFIGURE
SCAN menu, which is used to conÞgure the var-
ious layers of scan operation.
4.9 Digital I/O port:
Describes the input/output
port, which is made up of four output lines and
one input line.
4.10 External triggering:
Covers external triggering
using the rear panel BNC connectors.
4.11 Trigger link:
Covers external triggering using the
trigger link.
4.2 Power-up procedure
The Model 7001 can be operated from line voltages
from 100-240VAC at line frequencies of 50 or 60Hz.
4.2.1 Line power connections
Using the supplied power cord, connect the instrument
to an appropriate AC power source. The female end of
the cord connects to the AC receptacle on the rear panel
of the instrument. The other end of the cord connects to
a grounded AC outlet.
WARNING
The Model 7001 must be connected to
a grounded outlet to maintain contin-
ued protection against possible shock
hazards. Failure to use a grounded
outlet may result in personal injury
or death due to electric shock.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
Need help?
General
