USE OF THE MACHINE AND RELATED CONTROLS
139
• When the machine is travelling at high speed, the travel
speed increase warning light (5) comes on.
For details on the travel speed, see paragraph ."5.1 TECH-
NICAL SPECIFICATIONS"
q
When the engine is started, the low speed is automatically selected. When the machine travels at high speed on
soft ground or up a slope and the load increases, the low speed is automatically selected, but the travel speed
increase warning light remains on. When the load is reduced, the travel system automatically changes over to
high speed.
3.3.5.4 STOPPING THE MACHINE
q
Avoid stopping the machine abruptly. Always calculate a sufficient safety distance when stopping.
1. Shift the left and right travel levers (1) to the NEUTRAL
position, then stop the machine.
To Next Page
Loading...
Need help?
General
