LIFTING CAPACITIES
246
5.2 LIFTING CAPACITIES
5.2.1 LIFTING CAPACITIES
q
According to the harmonized standard EN474-5 (§ 4.1.7.5), the machine cannot lift weights exceeding
1000 kg, unless it is provided with appropriate equipment.
q
Carry out lifting operations only with the machine positioned on firm and flat ground.
q
The load does not exceed 87% of the hydraulic lifting capacity or 75% of the tipping limit.
* Load limited by the hydraulic lifting capacity and not by the tipping limit.
ROPS CANOPY + STANDARD ARM + STANDARD COUNTERWEIGHT + LOWERED BLADE Unit: kg
1 m 1.5 m 2 m 2.5 m 3 m 3.5 m Max.
3.0 m
*311*311------*312*312
2.5 m - - *278 229 - - - - *285 213
2.0 m *286 *286 *278 230 - - - - *279 172
1.5 m *504 489 *371 316 *313 224 *284 166 - - *280 152
1.0 m *486 299 *364 217 *303 163 - - *284 142
0.5 m *574 285 *407 209 *322 160 - - *292 142
0 m *930 417 *600 278 *426 204 *324 157 - - *296 146
-0.5 m *1419 811 *840 420 *569 277 *409 203 - - - - *300 161
-1.0 m *1175 823 *690 427 *480 281 *331 206 - - - - *298 196
-1.5 m *422 *422 *266 *266 - - - - - - *265 *265
To Next Page
Loading...
