GENERAL PRECAUTIONS
42
2.2.8 GETTING ON AND OFF THE MACHINE
q
Do not jump on or off the machine, neither when it is at rest nor
when it is moving.
q
When getting on or off the machine, always use the handles
and the tracks; get on and off the machine very carefully.
q
Do not hold or rest on the control levers.
q
Both when getting on and when getting off the machine, always
maintain three points of contact (holding or resting points), in or-
der to avoid losing your balance and falling down.
q
Tighten the handle screws if they are loose, and clean the han-
dles and tracks if they are dirty with oil or grease.
Carefully clean the cab floor if it is dirty with oil, grease, mud or
rubble.