INTRODUCTION
5
1.3 INTRODUCTION
1.3.1 INTENDED USE OF THE MACHINE
This Komatsu machine is designed to be used mainly for the following work:
q
Digging work
q
Leveling work
q
Ditching work
q
Loading
See the section "3.3.13 OPERATIONS THAT CAN BE PERFORMED WITH THE HYDRAULIC EXCAVATOR" for
further details.
1.3.2 DEMOLITION WORK
• A demolition machine is a machine based on earth moving
machinery (see EN ISO 6165) and including equipment and
attachment (working tool - e.g. processor or breaker) spe-
cifically designed to demolish, cut, loosen, separate, pick
up, transport and distribute component parts of buildings
or civil engineering structures.
q
This machine is not prepared for use in Demolition.
q
Using this machine in demolition work gives an increased
risk of serious injury or death.
q
All Komatsu machinery that have been specifically de-
signed for, and can be used in, demolition work, will dis-
play the Komatsu demolition decal.
q
If the machine does not display this decal and it is neces-
sary to carry out demolition work, contact your distributor
for information on demolition machinery compliant with
the applicable standards.
1.3.3 IMPROPER OR UNAUTHORIZED USES
q
This paragraph describes some of the improper or unauthorized uses of the machine; since it is impos-
sible to predict all the possible improper uses, if it is necessary to use the machine for particular appli-
cations, contact your Komatsu Distributor before carrying out the work.
q
The instructions regarding the authorized optional equipment are given in the relevant operation and
maintenance manuals; if the equipment is supplied by Komatsu, these publications are enclosed to this
manual.
q
The instructions regarding the assembly of the authorized equipment, the controls requiring special ar-
rangements on the machine and the hydraulic couplings necessary for the operation of such equipment
are grouped in the final section of this manual.
To Next Page
Loading...
Need help?
General
