17
17-8 bizhub C554/C454/C364/C284/C224
[Shift Output Each Job]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Shift Output Each Job]
Specify whether to shift paper for each job before ejection.
[Yes] is specified by default.
Tips
- This item is available if the Finisher or Job Separator JS-506 is installed on this machine.
[Date/Time Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings]
Specify the current date and time and time zone of this machine.
[Daylight Saving Time]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Daylight Saving Time]
Select whether to apply daylight saving time settings. To apply the daylight saving time, specify the daylight
saving time, and the start and end dates.
[Weekly Timer Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Weekly Timer Settings]
Select whether to automatically switch between power save and normal mode using the weekly timer.
To use the weekly timer, specify the schedule for switching between power save and normal modes. Option-
ally, you can use the tracking function that automatically sets a schedule to fit your office usage.
Settings Description
[Current Time] Enter the current date and time.
• [Set Date]: Automatically adjust the date and time of this machine using
an NTP server. To perform time adjustment, set the time difference be-
tween UTC and your local time in [Time Zone] and tap [Set Date].
This button is available if an NTP server has been registered by select-
ing [Administrator Settings] - [Network Settings] - [Detail Settings] -
[Time Adjustment Setting].
[Time Zone] To automatically adjust the time of this machine using an NTP server, set
the time difference between UTC and your local area in multiples of 30 min-
utes.
Settings Description
[Enable Settings] Select whether to apply Daylight Saving Time to this machine.
If you select [Yes], enter the number of hours to move the clock forward to
reflect daylight saving time. The current time is set forward to reflect day-
light saving time.
[No] is specified by default.
[Start/End Settings] If you select [Yes] in [Enable Settings], specify the start and end dates and
times for applying the daylight saving time.
Specify the start/end date and time by selecting [Weekly] or [Daily], respec-
tively.
Settings Description
[Weekly Timer ON/OFF
Settings]
Specify whether to use the weekly timer. Then, select a power save mode
for the machine to enter according to the weekly timer.
For details, refer to page 17-9.
[Time Settings] Specify the time for switching to the power save mode ([OFF Time]) and the
time for returning to the normal mode ([ON Time]) for each day of the week.
For details, refer to page 17-9.
To Next Page
Loading...
Need help?
General
