Name: Konica Minolta bizhub C364
Brand: Konica Minolta
Rating: 4 (1 reviews)

To Next Page

To Previous Page

bizhub C554/C454/C364/C284/C224 17-15

[Centering]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]

- [Centering]

Adjust the print start position on the left edge of the paper relative to the paper discharge direction.

Press Start to print a test pattern. Check that the margin between the left edge and the print starting position

is 3/16 inches (4.2 mm) (+/- 1/32 inch (+/- 0.5 mm)). Repeat adjustments, as required.

Tips

- Only 8-1/2 e 11 v (A4 v) paper can be used for adjusting the Bypass Tray.

[Leading Edge Adjustment (Duplex Side 2)]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]

- [Leading Edge Adjustment (Duplex Side 2)]

Adjust the print start position at the leading edge of the paper relative to the paper discharge direction for

printing the back side in 2-sided printing.

Press Start to print a test pattern. Check the test pattern and adjust so that the margin between the leading

edge of the paper and the print start position is 3/16 inches (4.2 mm). Repeat adjustments, as required.

Settings Description

[Select Tray] Select a paper tray that is used to adjust the start position for printing.

[Adjust Value] Enter an adjustment value between -3.0 and +3.0 mm by tapping [-] and

[+].

[0.0 mm] is specified by default.

Settings Description

[Paper Type] Select the type of paper that is used to adjust the start position for printing.

[Adjust Value] Enter an adjustment value between -3.0 and +3.0 mm by tapping [-] and

[+].

[0.0 mm] is specified by default.

Other manuals for Konica Minolta bizhub C364

Questions and Answers:

Need help?

Do you have a question about the Konica Minolta bizhub C364 and is the answer not in the manual?

General