bizhub C554/C454/C364/C284/C224 17-73
17
[Enhanced Security Mode]
To display: [Utility] - [Administrator Settings] - [Security Settings] - [Enhanced Security Mode]
Select whether to enable the Enhanced Security Mode.
If you enable the Enhanced Security Mode, the various security functions are forcibly configured. This allows
you to ensure higher-level security of data management. For details, contact your service representative.
To enable the enhanced security mode, the following settings must have been configured.
If you enable the Enhanced Security Mode, the following settings are forcibly changed.
Setting items in Administrator Settings Settings to forcibly changed
[User Authentication/Account Track] - [General
Settings] - [User Authentication]
Set to [OFF].
[Security Settings] - [Administrator Password] Set a password complying with password rules.
[Security Settings] - [HDD Settings] - [HDD En-
cryption Setting]
Enable the HDD Encryption.
In Web Connection, register the certificate. For details, refer to [User's Guide: Web Management
Tool].
[Image Controller Setting]
[Management Function Choice]
[CE Password]
[CE Authentication]
[HDD]
These items must be configured by your service rep-
resentative. For details, contact your service repre-
sentative.
Setting items in Administrator Settings Settings to forcibly changed
[System Settings] - [Restrict User Access] - [Re-
strict Access to Job Settings] - [Registering and
Changing Addresses]
Set to [Restrict].
[User Authentication/Account Track] - [General
Settings] - [Public User Access]
Set to [Restrict].
[User Authentication/Account Track] - [User Au-
thentication Settings] - [Administrative Settings] -
[User Name List]
Set to [OFF].
[User Authentication/Account Track] - [Print
without Authentication]
Set to [Restrict].
[User Authentication/Account Track] - [User/Ac-
count Common Setting] - [Counter Remote Con-
trol]
Set to [Restrict].
[User Authentication/Account Track] - [Print Sim-
ple Auth.] - [Authentication Setting]
Set to [Restrict].
[Network Settings] - [FTP Settings] - [FTP Server
Settings]
Set to [OFF].
[Network Settings] - [E-mail Settings] - [S/MIME
Communication Settings]
• [Automatically Obtain Certificates] is set to [No].
• [3DES] is set if [E-Mail Text Encryption Method]
has been set to one of [RC2-40], [RC2-64], [RC2-
128], and [DES].
[Network Settings] - [SNMP Settings] - [SNMP
v1/v2c Settings] - [Write Setting]
Set to [Invalid].
[Network Settings] - [SNMP Settings] - [SNMP v3
Settings]
[Security Level] for read and write allowed users is set
to [auth-password/priv-password].
The Security Level can be changed to [auth-pass-
word].
[Network Settings] - [TCP Socket Settings] -
[TCP Socket] - [Use SSL/TLS]
Set to [ON].
[Network Settings] - [WebDAV Settings] - [Web-
DAV Server Settings] - [SSL Setting]
Set to [SSL Only].
[Network Settings] - [Web Browser Setting] Set to [Invalid].
To Next Page
Loading...
Need help?
General
