bizhub C554/C454/C364/C284/C224 17-65
17
[Authentication]
To display: [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings] - [Authentication]
Select whether to authenticate users accessing via OpenAPI. To authenticate, enter the login name and pass-
word in [Login Name] and [Password].
[OFF] is specified by default.
[External Application Connection]
To display: [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings] - [External Applica-
tion Connection]
Specify whether to connect to external application software via OpenAPI.
[ON] is specified by default.
[Prefix/Suffix Automatic Setting]
To display: [Utility] - [Administrator Settings] - [System Connection] - [Prefix/Suffix Automatic Setting]
When using a fax server that communicates in the E-mail format, specify whether to automatically add a pre-
fix and a suffix to the destination number.
[OFF] is specified by default.
Tips
- The setting in Registration No. 01 ([Utility] - [Administrator Settings] - [Network Settings] - [Detail Set-
tings] - [Prefix/Suffix Setting] - [Prefix/Suffix Registration]) is applied.
- If Prefix/Suffix Automatic Setting is set to [ON], the other settings will be restricted.
– [Utility] - [Administrator Settings] - [Fax Settings] are not available (excluding [Destination Check Display
Function], [PC-FAX Permission Setting], [Confirm Address (TX)] and [Confirm Address (Register)]).
–In Web Connection, setting is disabled for [Store Address] - [Application Registration].
– Bulletin Board User Box, Polling TX User Box, Compulsory Memory RX User Box, and Re-Transmission
User Box are disabled.
– Bulletin Board User Box and Relay User Box cannot be registered.
– Confidential RX is not available.
– The Off-Hook key is not available.
– [Fax Header Settings], [Line Setting], [Quick Memory TX], [Polling TX], [Polling RX], [Timer TX], [Pass-
word TX], [F-Code TX] are not available in the scan/fax mode.
– The network fax function is not available.
– [Outside], [Tone], [Pause], [-], and [Line Setting] are not available when registering a fax destination in
the address book.
– You cannot output a report by selecting [Job List] - [Comm. List].
– A number excluding a prefix and suffix is displayed in [Address] of [Job History].
– [Report Type] in [Comm. List] defaults to [Scan].
– [Address Type] that appears when you select [Comm. List] - [Log] - [Details] defaults to [E-mail].
– [Meter Count] is updated only when [Scans] is enabled in [Scan/Fax]; however, [Fax TX] is not updated.
[Printer Information]
To display: [Utility] - [Administrator Settings] - [System Connection] - [Printer Information]
Register the name, installation location, and other information on this machine that the connected system is
to be notified of.
The settings in [Printer Information] are linked to [Printer Information] found under [Utility] - [Administrator Set-
tings] - [Network Settings] - [HTTP Server Settings].
This can be set if the Bluetooth interface is enabled.
Tips
- The Local Interface Kit EK-607 is required to use the Bluetooth function.
- The settings by the service representative are required to use the Bluetooth function. For details, con-
tact your service representative.
To Next Page
Loading...
Need help?
General
