bizhub C554/C454/C364/C284/C224 7-7
7
6 After all originals are scanned, tap [Finish] and press the Start key.
Copying begins.
Related setting
- You can select whether to scan originals continuously at all times even though [Separate Scan] is not
specified when scanning originals using the Original Glass (Default: [OFF]). For details, refer to
page 16-8.
- You can select the timing that the copy begins when scanning an original by specifying [Separate Scan].
(Default:[Page Print]) For details, refer to page 16-13.
Copying multiple originals in different settings collectively ([Program Jobs])
Originals are scanned with different settings for each set, and copied collectively. Use this function when var-
ious types of originals are mixed, such as 1-sided original to be printed on one side of paper, and 2-sided
original to be copied by enlarging.
After all originals have been scanned, you can add page numbers or finishing functions, such as sort, to copy
them.
0 When you set [Program Jobs], [Group] cannot be selected in [Finishing].
1 Load the original.
2 Tap [Application] - [Others] - [Program Jobs], and set to [ON].
3 Configure the copy settings, then press Start.
The original is scanned.