bizhub C554/C454/C364/C284/C224 17-33
17
[Reset Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings]
Select whether to reset the functions and settings which are currently displayed when this machine has not
been operated for a certain period of time.
[System Auto Reset]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [System Auto Reset]
Specify whether to reset all settings (except registered settings) when this machine has not been operated
for a certain period of time.
Tips
- Log out of the Administrator Setting or User Authentication/Account Track mode according to the time
setting for [System Auto Reset Time] when user authentication/account track is active or the enhanced
security mode is enabled. If [OFF] is selected, you will be logged out after one minute.
[Auto Reset]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Auto Reset]
Specify whether to reset all settings (except registered settings) for each of Copy, Fax/Scan, User Box func-
tions when this machine has not been operated for a certain period of time.
To reset them, set the amount of time that elapses before the settings are reset.
[1] minute is specified by default.
Settings Description
[System Auto Reset] Specify whether to reset all settings (except registered settings) when this
machine has not been operated for a certain period of time.
For details, refer to page 17-33.
[Auto Reset] Specify whether to reset all settings (except registered settings) for each of
Copy, Fax/Scan, User Box functions when this machine has not been op-
erated for a certain period of time.
For details, refer to page 17-33.
[Job Reset] Select whether to reset settings for the conditions that are applied when
changing users or loading document to the ADF.
For details, refer to page 17-34.
Settings Description
[Priority Mode] Select a function that is to be displayed in preference after the settings
have been reset.
[Copy] is specified by default.
[System Auto Reset Time] Enter the amount of time that elapses until the selected function is reset.
If you choose not to reset the settings, select [OFF].
The default is [1] min. (allowable range: [1] to [9] min.).
To Next Page
Loading...
Need help?
General
