Using the Scan Functions
8
C350 8-55
8.10 Performing Scan to HDD Operations
The Scan to HDD operation is used to save the scanned image data to a
box on the hard disk installed in this machine. The image data saved to
the hard disk can be downloaded to the computer using PageScope Web
Connection.
✎
Note
To use this scan function, an optional hard disk must be installed in
this machine.
✎
Memo
The data scanned and saved to the hard disk here can also be
transferred. For details, refer to “10 Using the Box Functions”.
8.10.1 Flow of Scan Operation
Procedure
1 Using PageScope Web Connection, create a user box for saving the
scanned data.
☞ “Creating User Boxes” on page 8-57
2 As necessary, set the storage period for scanned data.
☞ “Setting the Storage Period of the Scanned Data” on page 8-59
3 Using PageScope Web Connection, perform one-touch key
registration or temporary key registration.
☞ “Registering Destinations in Advance” on page 8-25
4 Using this machine’s control panel, specify the destination of the
scanned data.
☞ “Setting the Destination” on page 8-60
5 Using this machine’s control panel, set the scan mode and document
designation.
☞ “Scan Mode Screen” on page 8-14 and “Original Setting Screen” on
page 8-16
To Next Page
Loading...
Need help?
General
