Konica Minolta C350 User Manual

8
Using the Scan Functions
8-66 C350
8.11.2 Setting the E-mail Transmission
Using PageScope Web Connection or this machine’s control panel, set
the mail server (SMTP server) to perform e-mail transmissions.
Using PageScope Web Connection
1 Start up PageScope Web Connection.
2 Enter the administrator access code, and log in to Administrator mode.
3 On the “Network” tab, click E-mail / Internet FAX, and then click Send
in the sub-menu that appeared.
4 Specify settings for the following.
SMTP Server Set the IP address of the SMTP server.
Port Number Set the port number of the SMTP server.
(Normally, use the default value of 25.)
SMTP Connection
Timeout
Set the connection timeout for the SMTP server.
Maximum E-mail Size Set the maximum size of the transmitted mail.
Settings: “No Limitation”, 100 to 3000 KB (in units of 100 KB)
Binary Division Set whether to divide the e-mail into multiple e-mails (binary level)
when the e-mail size exceeds the maximum e-mail size.
However, the receiving Internet fax device may not support binary
division.
Refer to “Binary Division and Scanned File Separation” on
page 8-68.

Konica Minolta C350 Specifications

General

Brand	Konica Minolta
Model	C350
Category	All in One Printer
Language	English