12
Using PageScope Web Connection
12-46 C350
12.6.4 Scan Tab
Scan
You can specify scan and transmission settings.
Procedure
➜ Click the “Scan” tab, and then click Scan in the menu.
Scan
Device Name Enter the device name for this machine. The name entered
here is the character string that is attached at the beginning
of image file names created by the scan functions.
Settings: Up to 36 characters
Refer to “File Name” on page 8-4.
Color/Grayscale
Compression Level
Select the image compression mode.
Settings: “High Quality”, “Normal”, or “Economy”
Priority Compression Method
for Monochrome (PDF)
Select the priority compression method for PDF files.
Settings: “MH” or “MMR”
Priority Compression Method
for Monochrome (TIFF)
Select the priority compression method for TIFF files.
Settings: “MH” or “MMR”
Send
Scanned File Separation Set the segmentation method (in units of pages) when the
maximum size is exceed during Scan to E-mail and Scan to
Internet FAX operations.
Settings: “Yes” or “No”
For Scan to E-mail, refer to “Binary Division and Scanned
File Separation” on page 8-43.
For Scan to Internet FAX, refer to “Binary Division and
Scanned File Separation” on page 8-68.
E-mail Address (From:) Specify the sender’s e-mail address (From address) that is
used for e-mail messages sent from this machine. This is
the sender’s e-mail address that appears for Scan to E-mail
and Scan to Internet FAX operations, and for URL
notification by e-mail.
Refer to “Error Notification” on page 8-45 and “Error
Notification” on page 8-71.
To Next Page
Loading...
Need help?
General
